Beaudesert Exhausts Rugged 441 Toyota Prado 150 Series 2009-2015 3L D4D Turbo Diesel Exhaust

PLEASE NOTE
If your order is not in stock, the approximate wait time is four to six weeks from the date of your order.  
 

Beaudesert Exhaust’s full 2 3/4″ mandrel bent exhaust system to suit the Toyota Prado 150 3L.

Rugged is the Beaudesert standard system which is made out of 441 grade stainless steel tube.

Does your car have turbo lag or lack that pulling power? The factory exhaust restricts the airflow that is coming from the turbo. The pipes are too small and the components are not letting the engine breathe to the best of its ability. Majority of this can be solved with a new exhaust from the back of the turbo.
You will gain anywhere up to 8-12% improved performance just by letting the airflow out of the motor. Turbo lag will reduce resulting in better low down torque and giving you more pulling power out of the top of the rev range.

 But be careful! Having an exhaust system too large for the motor can have the opposite effect! We have had some customers come back to us with aftermarket exhausts that are too big for the motor and in turn it has given them more turbo lag and less overall power gains. On some motors if the exhaust is too big you can run into some problems including over boosting or even boost spike of the turbo which will throw you into limp mode. This can be extremely dangerous if you are towing a caravan or trailer. This can happen from the turbo trying to spin too hard and fast, the ECU recognises this and can throw the car into limp mode.

"Not only have we completed real world testing, we also receive significant amounts of customer feedback regarding overall performance and fuel economy gains a Beaudesert Exhaust system can give your vehicle.   Improvements are not only seen by those towing, but by everyday drivers who want more from their vehicle."
 
Mandrel bent, welded and manufactured in South East Queensland, this high quality exhaust system includes:
- Replacement Dump Pipe off turbo – 2mm wall thickness
- 1/4in BSP Pyrometer fitting welded onto dump pipe – Standard in all systems
- Ceramic coating of dump pipe standard (Please note: There may be a delay with your order for the coating)
- Euro 3 Standard 200 cell hi-flow Catalytic Converter – meets all emissions standards without restricting gas flow
- Double braided stainless steel flex joint standard on all systems – inner and outer braid makes the flex joint stronger
- Polished stainless steel tip standard on 441 grade stainless steel system
- No muffler pipe is available as an additional pipe for a louder note
- This system can be purchased with no mufflers – designed for off road use only –This is for legal reasons varying from state to state
- 2 bolt 10mm 304 grade stainless steel flange plates
- Reinforced brackets with supports – 12mm 304 grade stainless steel rod with knobs ensures the hangers don’t fall out of rubbers
- Zinc plated locking nuts and bolts
- Fitting Kit and easy to follow instructions
- Boxed and bubble wrapped for freight

Also available in Ultimate 304 grade stainless steel.

Approximate time to install is 4-5 hours